.png)
Main features
Out of Stock
The transducer has been enhanced to ensure greater reliability under all conditions, with a sturdier structure that makes the LT series highly durable, even in applications involving heavy vibration. Installation is made easier due to the absence of electrical signal variations outside the Theoretical Electrical Stroke, guaranteeing consistent and accurate performance during operation.
In addition, the introduction of new grooves offers an excellent alternative to the traditional fastening system with brackets, providing more flexibility and convenience. These improvements make the transducer particularly well-suited for demanding applications, including plastic injection presses, vertical presses, and various other industrial processing machines.
|
Useful electrical stroke (C.E.U.) |
From 0 to 300mm |
|
Independent linearity (within C.E.U.) |
± 0.05% |
|
Resolution |
infinite |
|
Repeatability |
0.01mm |
|
Electrical connections LTM LTH LTB LTF |
4-pole connector DIN43650 3-pole connector 5-pole connector DIN43322 1 meter 3-pole shielded cable |
|
Displacement speed |
Standard ≤ 10m/s |
|
Protection level |
IP60 (IP65 on request) |
|
Life |
>25x106m strokes, or 100×106 maneuvers, whichever |
|
Displacement force |
≤ 2N IP60 version |
|
Vibrations |
5…2000Hz, Amax =0.75 mm amax. = 20 g |
|
Shock |
50 g, 11ms |
|
Acceleration |
200 m/s2 max (20g) |
|
Tolerance on resistance |
± 20% |
|
Recommended cursor current |
< 0,1 μA |
|
Maximu cursor current |
10mA |
|
Maximum applicable voltage |
60V |
|
Electrical isolation |
>100MΩ at 500V=, 1bar, 2s |
|
Dielectric strength 1bar |
< 100 μA at 500V~ ,50Hz, 2s, |
|
Dissipation at 40°C (0W at 120°C) |
3W |
|
Thermal coefficient typical of resistance |
-200…+ 200 ppm/°C |
|
Actual Temperature Coefficient of the output voltage |
≤ 5ppm/°C typical |
|
Working temperature |
-30…+100°C |
|
Storage temperature |
-50…+120°C |
|
Material for transducer case |
Anodised aluminium Nylon 66 G 25 |
|
Material for pull shaft |
Stainless steel AISI 303 |
|
Mounting |
Brackets with adjustable distance between centers or with M5 screw ISO4017-DIN933 |
